Connecting to Open-source Platforms
Connecting to Home Assistant via Zigbee2MQTT
Table of contents
Step 1 Preparation ---- Step 2: install add-ons ---- Step 3: Configure the GW90-POE-Ti ---- Step 4: Add a Zigbee Sub-device
Step 1 Preparation
Before getting started, ensure that Home Assistant is installed and the GW70-XK is connected to the host’s USB port.
If not yet installed, please follow the Home Assistant Installation Guide.
When connecting HA through the Zigbee2MQTT Add-on, you need to install two add-ons:
1、Mosquitto broker (MQTT Broker)
2、Zigbee2MQTT
Go to Settings → Add-ons → Add-on store and install the Mosquitto broker add-on, then start it.
Install Zigbee2MQTT
Go to Settings → Add-ons → Add-on store and install the Zigbee2MQTT add-on, then start it.
Open the Zigbee2MQTT add-on→ start → Open web UI .Then configure according to the video below.
WiFi/ LAN Connection
Open the Zigbee2MQTT add-on→ Configuration→serial. Enter port and adapter information.
(port and adapter information can be find in dongle web management interface)
After completing the configuration, start the Zigbee2MQTT add-on. Wait for about two minutes,
then you can click to enter the Web UI Console to add and manage devices.
Connecting to Home Assistant via ZHA
Step 1 Preparation ---- Step 2: install Integration ---- Step 3: Configure the GW90-POE-Ti ---- Step 4: Add a Zigbee Sub-device
Step 1 Preparation
Before getting started, ensure that Home Assistant is installed and the GW90-POE-Ti is connected to WiFi router. If not yet installed,
please follow the Home Assistant Installation Guide
When connecting HA through ZHA, you need to install Zigbee Home Automation Integration.
Install Zigbee Home Automation Integration (port information can be find in dongle web management interface)
USB Connection
WiFi/ LAN Connection
Step 3: Add and manage zigbee devices
After completing the configuration, start the ZHA. Wait for about two minutes,
then you can click to enter the Web UI Console to add and manage devices.